Overview
Electric and Pneumatic Proportional Valves are precision flow control devices designed for continuous regulation of pressure, flow rate, and process media in industrial automation systems.
Unlike on/off valves, proportional valves enable real-time modulation based on analog or digital signals, ensuring stable and repeatable process control under variable operating conditions.
These valves are widely used in water treatment, chemical dosing, HVAC automation, oil & gas systems, and OEM equipment integration projects.
All products are manufactured under controlled processes and 100% tested before shipment to ensure long-term operational reliability.
-
![Smart Proportional Control Valve]()
Smart Proportional Control ValveSmart Proportional Control Valve is an industrial flow modulation device designed for precise and stable control in automated process systems.read more -
![Proportional Servo Valve]()
Proportional Servo ValveProportional Servo Valves are electro-hydraulic control components designed for high-precision control of flow, pressure, and motion in hydraulic systems.read more -
![Pneumatic Proportional Pressure Valve]()
Pneumatic Proportional Pressure ValveThe Pneumatic Proportional Pressure Valve is an industrial control device that adjusts compressed air pressure in proportion to an electrical signal (0–10V / 4–20mA).read more -
![Electric Proportional Flow Control Valve]()
Electric Proportional Flow Control ValveIn industrial fluid systems, unstable flow is commonly caused by pressure fluctuations, variable load conditions, and the limited accuracy of manual or on/off control valves.read more -
![Electric Proportional Directional Valve]()
Electric Proportional Directional ValveElectric Proportional Directional Valve is an electro-hydraulic control valve designed for precise regulation of flow direction, flow rate, and pressure in industrial hydraulic systems.read more -
![Electric Proportional Control Valve]()
Electric Proportional Control ValveElectric Proportional Control Valve is an industrial-grade flow control device designed for precise regulation of flow, pressure, and temperature in automated process systems.read more
Proportional valves convert electrical or pneumatic signals (4–20mA, 0–10V, PWM, or air pressure) into precise mechanical displacement of the valve spool or actuator.
Control Architecture:
- Open-loop proportional control
- Closed-loop control with feedback (optional)
Engineering Logic:
Signal input → controller → actuator → spool movement → proportional flow output
Flow output is dependent on system pressure differential (ΔP), fluid properties, and valve Kv/Cv configuration.
Verified Engineering Performance Data
All data is verified under standardized industrial test conditions.
| Flow accuracy | ±1% to ±2% |
| Repeatability | ≤ ±0.5% |
| Hysteresis | < 3% |
| Response time | ≤ 200 ms |
| Kv/Cv range | Application-engineered selection available |
| Operating pressure | 0–40 bar (higher available on request) |
| Temperature range | -20°C to +200°C |
| Leakage standard | ISO 5208 / IEC 60534 design compliant |
| Cycle life | ≥ 1,000,000 cycles |
| Protection | IP65 / IP67 optional |
Testing & quality evidence
Factory Testing System (100% Inspection Before Shipment)
Each valve is verified through the following process:
- Incoming Material Inspection (IQC)
- Machining Process Inspection (IPQC)
- Functional Performance Testing (FAT)
- 100% Pressure & Leakage Test
Test Equipment Capability:
- Hydrostatic pressure test bench (industrial rated pressure verification)
- Flow calibration system (Kv/Cv verification)
- Leakage detection system (zero-leak validation)
- Cycle life durability test rig (long-term simulation testing)
Traceability System:
- Each valve has a unique serial number
- Batch-level production tracking
- Full inspection record available upon request
Middle East Water Treatment EPC Project
Installed in continuous chemical dosing systems operating 24/7. The system requires stable flow regulation under fluctuating inlet pressure and high salinity conditions.
European HVAC Automation System
Integrated into building automation systems for dynamic pressure and temperature control in large commercial facilities.
Oil & Gas Pipeline Control System
Used in high-pressure flow regulation systems requiring long-term stability under variable operating loads.
Asian Chemical Processing Plant
Applied in corrosive fluid dosing systems requiring high repeatability and corrosion-resistant material selection.
OEM Industrial Equipment Integration
Used in automated machinery requiring synchronized pneumatic and hydraulic control systems.
Manufacturing & supply reliability
The company conducted a competitive advantage analysis to identify its strengths and weaknesses compared to its rivals.
Manufacturing Capability:
- CNC precision machining lines
- Standardized assembly and calibration
- Full-process quality control system
Supply Reliability:
- Stable OEM & EPC production capacity
- Controlled lead time for bulk orders
- Long-term supply chain stability
Quality Assurance:
- 100% pressure and function testing before shipment
- Batch traceability system
- Engineering technical support available
Commercial Terms:
- Warranty: 12–24 months (project dependent)
- Technical response: within 24 hours
- Spare parts support available
Engineering selection logic
Valve selection depends on:
Flow rate (Q)
Pressure differential (ΔP)
Medium type & viscosity
Control signal type
Required Kv/Cv value
Response time requirement
As one of the leading manufacturers and suppliers of electric & pneumatic proportional valves in China, we specialized in providing high quality customized service. Please feel free to buy bulk cheap electric & pneumatic proportional valves made in China here from our factory. Contact us for pricelist and free sample.
0 10V Proportional Valve, 0 5V Proportional Valve, 4 20ma proportional control valve