Electric Stop Valve Is A New Type Of Valve That Is Widely Used

The working principle of the electric stop valve and the American standard gate valve is to make the valve unblocked or blocked by rotating the valve. The gate valve is light and small in size. It can be made into a large diameter, has reliable sealing, simple structure, and convenient maintenance. The sealing surface and the spherical surface are often in a closed state and are not easily eroded by the medium. It is widely used in various industries.
The electric stop valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. The electric stop valve is a new type of valve that is widely used. It has the following advantages:
1. The fluid resistance is small, and its resistance coefficient is equal to that of the pipe section of the same length.
2. Simple structure, small size and light weight.
3. Tight and reliable, the sealing surface material of the gate valve is widely used in plastic, with good sealing performance, and has also been widely used in vacuum systems.
4. Easy to operate, open and close quickly, just rotate 90° from full open to full closed, which is convenient for long-distance control.
5. Easy maintenance, the gate valve has a simple structure, the sealing ring is generally movable, and it is convenient to disassemble and replace.
6. When fully open or fully closed, the sealing surface of the gate body and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when passing through.
7. It has a wide range of applications, with diameters ranging from a few millimeters to several meters, and can be used from high vacuum to high pressure. When the ball rotates 90 degrees, the inlet and outlet should all present a spherical surface, thereby cutting off the flow.